Kingston HyperX 32GB (8x4GB) Memory Kit 1600MHz DDR3 Non-ECC CL9 240-pin DIMM

Summary

Kingston's KHX1600C9D3K8/32GX is a kit of eight 512M x 64- bit (4GB) DDR3-1600 CL9 SDRAM (Synchronous DRAM) 2Rx8 memory modules, based on sixteen 256M x 8-bit DDR3 FBGA components per module. Each module kit supports Intel XMP (Extreme Memory Profiles). Total kit capacity is 32GB. Each module kit has been tested to run at DDR3-1600 at a low latency timing of 9-9-9 at 1.65V. The SPDs are programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers and requires +1.5V.

Warranty

Lifetime

Features

1. JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
2. VDDQ = 1.5V (1.425V ~ 1.575V)
3. 667MHz fCK for 1333Mb/sec/pin
4. 8 independent internal bank
5. Programmable CAS Latency: 9, 8, 7, 6
6. Posted CAS
7. Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
8. Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
9. 8-bit pre-fetch
10. Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
11. Bi-directional Differential Data Strobe
12. Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
13. On Die Termination using ODT pin
14. Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
15. Asynchronous Reset
16. PCB : Height 1.180' (30.00mm), double sided component

Specifications

User Reviews

Name:	*
Email:	*
Rating:	1 2 3 4 5
Comment:
Code:	*

* Please note that HTML tags are not allowed.
* We never share or display email addresses but we may share your comments with our sister sites.